1. Products Introduction
Basic ingredients of "GRAND100" is simplicity and style with which it breaks all tradition and comes up with fresh and new style in compact monitoring. Device is small and lightweight and battery provides quality service. Portable "GRAND100N" is accessible and connectivity is high level. Device is absolutely perfect for emergency units and for general, intensive and post-anesthesia care units. Caregivers can provide ultimate patient care for easy accessibility of patient's current and critical information from bedside.
The demands and dynamics associated with patient well being revolves around being able to make the right decision at the right time, the Grand Modular series of patient monitors rises to these challenges whatever the environment Whether you prefer to display patient status in this traditional format or alternatively display them as a series of large numbers, using the GRAND100 this choice and selection could not be simpler; changing from one format to another is achieved through a single key press operation. Individual profiles can be developed for each of your patient groups matching the monitor's capability with your clinical speciality and environment. Profiles can either be created locally through the monitor's user interface or developed remotely and deployed via your technical service team.
2. Main Features and Advantages
Measured parameter
ECG, RESP, etCO2, NIBP, invasive blood pressure, SpO2
Applications
intensive care, clinical, emergency, anesthesia, for surgery units, physiology
Other characteristics
continuous, with touchscreen
Screen size
10.4 in
1.10.4'' inches high resolution display, Touch screen optional
2. 9 traces on screen waveforms and maximal up to 13.
3. User customized NIBP measuring cycles up to 5 phase.
4. Data export and software upgrade
5. Versatile clinical calculations for application convenience
6.HL7 protocol, bed to bed view and 12-lead ECG available.
3. Main Technical data:
| ECG |
GRAND100 |
| Input |
3/5 wire ECG cable |
| Lead section |
I II III aVR, aVL, aVF, V |
| Sensitivity ( gain) selection |
x 1/4, x 1/2, x 1, x 2, x 4 and auto |
| Sweep speed |
6.25mm/s, 12.5mm/s, 25mm/s, 50mm/s |
| Heart rate measuring range |
15-350bpm |
| HR measuring accuracy |
±1bpm or ±1% (select the bigger data) |
| Band width |
0.05-150Hz(diagnostic), 0.5-40Hz(Monitoring), 1-20Hz (Operation) |
| CMRR |
≥90dB (diagnostic), ≥105dB (monitoring and operation) |
| HR delay time |
≤10s |
| Pacemaker pulse detection and rejection function |
yes |
| NIBP |
|
| Test method |
Oscillometer |
| Typical measuring time |
<30 seconds ( typical adult cuff) |
| Philosophy |
Adult, Pediatric and Neonate |
Measurement range
|
Systolic pressure, diastolic pressure, mean arterial pressure |
| Systolic pressure |
Adult: 40-275 mmHg
Pediatric: 40-200 mmHg
Neonatal: 40-135 mmHg
|
| Diastolic pressure |
Adult: 10-210 mmHg
Pediatric: 10-150 mmHg
Neonatal: 10-95 mmHg
|
| Mean arterial pressure |
Adult: 20-230 mmHg
Pediatric: 20-165 mmHg
Neonatal: 20-110 mmHg
|
| Measurement type |
Systolic Diastolic Mean |
| NIBP measuring accuracy |
Mean difference ±5% mmHg, standard deviation :8mmHg |
| Measurement parameter |
Automatic, Continuous measurement |
| Measurement method |
Manual, Auto, STAT, multi-cycle mode |
| Automatic measuring intervals |
1-480min |
| SPO2 |
|
| Technique |
Dual wavelength optical method |
| Display Type |
Waveform, Data |
| Measurement range |
0-100% |
| SPO2 measuring accuracy |
Arms is not greater than 2% for range from 70% to 100% |
| Low perfusion performance |
As low as 0.3% |
| Pulse rate range |
30-250bpm |
| Accuracy |
±1bpm or ±2% (select the bigger data) |
| Resolution |
1bpm |
| Refresh cycle |
1s-2s |
| IBP |
|
| Technique |
Strain gauge transducer |
| Input sensitivity |
5uV/V / mmHg |
| Measuring range |
-50-300mmHg |
| Measuring accuracy |
±4mmHg or ±2%, whichever is greater |
| Measuring positions |
ART,PAP,PA, LAP, CVP, ICP, AUXPI, AUXP2 |
| Calibration |
zero |
| Respiration (Impedance & Nasal Tube) |
|
| Measurement type |
0-120rpm |
| Accuracy |
±1bm or ±5%, select the bigger data |
| Resolution |
1rpm |
| EtCO2 (Optional ) |
|
| Technique |
Infrared optical method |
| Sampling mode |
Sidestream or mainstream |
| Measurement range |
0-150 mmHg ±10%/min (sidestream) |
| Flow rate |
50ml/min |
| Measuring accuracy |
0-40 mmHg, ±2mmHg
41-70 mmHg, ±5% of reading
71-100 mmHg, ±8% of reading
101-150 mmHg, ±8% of reading |
| Display |
10.4 inch TFT display |
| Alarming mode |
3 level Audible-visual alarm |
| Networking port |
Ethernet port |
4.Certificate (ISO9001 CE FDA TUV)
5. Company Strength
GRAND Medical Group is the merged medical manufacture, (former factory is YUDA), with the former factories (YUDA) and the third investment, Grand now is the largest medical manufacture in North China. GRAND are focused on the medical equipments, hospital furniture, surgical instruments and ICU monitor equipments production and technical research. We have 38 workshops, with more than 480, 000 square meters. The factory founded in 1992, started from hospital furniture, hence we accumulated rich medical industrial experience. We mainly produce surgical equipment, like: Operating lamp, operating table, and medical pendant, we also produce hospital furniture, like: Hospital bed and medical cart, medical trolley. And the third factories invested ICU equipment: ECG, monitor, anesthesia machine, ultrasound machine. In 2020 Antivirus, Grand put into production of surgical masks and air sterile machine. Grand Medical group produce different kinds of products. High quality and favorable price. We′re pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.
1) Processing Workshop and Factory
2). Products Show Room
3). Quality Control
Q and A
Q1: Are you trading company or manufacturer ?
A: We are manufacture for 26 years,and we supply kinds of solution,meet your one-stop purchasing.
Q2: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock.or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q3: Do you provide samples ? is it free or extra ?
A: no,the sample is not free,but our MOQ is only one pc.
Q4: How to send the products to me?
A: by ship to your Port,or by air to your door or to your airport according to different requirements
Q5: what to do if i want visit your factory
A:you are welcome warmly,tell us your schedule and plans,we glad to arrange you the whole visit,if you come China the first time,need more help,we'll try our best .
Q6: What is your terms of payment ?
A: we accept TT/LC/West union/Paypal
Audited Supplier 
){kind=link}
){kind=link}