Why choose GRAND?
1.GRAND Medical is a new merged medical manufacture, we are the manufacture, the former brand is YUDA. We are the largest medical manufacture in North China. We have 4 factories, 39 workshops, more than 200 workers.
2.GRAND Medical group is a famous leading brand in China, especially we are very strong on operating room equipment, like operating lamp, operating table and hospital furniture.
3.By using 10 years, Grand medical group producing the world leading dynamic holter ECG, and we are doing more better patient monitors with the USA engineers.
4.We only accept serious buyer. During Carona virus, Grand Medical Group produced surgical and medical face masks, face shields, UV air sterile machine and hospital beds, Grand and YUDA successfully joined MOH tenders in a large variety medical supply.
Model: DST-700Q
Name: Image Intergrated Electric Operating Table
Features:
1. DST-700Q has a horizontal 330mm movements, supply accurate and convenient space for C-arm, can get X-ray imaging of full body without moving the patient.
2. Full carbon fiber material is China domestic patent technology R&D by ourselves, with high clear imaging results, low X-ray absorption. Can put the head support to leg board, to extend the end part for operations of lower parts of body.
3. Adopts the Germany DUKERON micro-motor, with electric gear mesh mechanism structure instead of the traditional hydraulic transmission. Germany beeline navigation rail, ensure the smooth movement.
4. Vertical/horizontal movement, head/foot, left/right tilt and adjustable back plate were controlled by different separated motors, they work individually and won't affect the others use.
5. One-reset function. Backup battery( 80-100 operation time). 304 stainless steel for the cover of ABS base, prevent glare impact and easy to clean. With two independant electric controlling system. High density memory mattress.
6. It is a China top high level operating table in same products, cooperated with Germany high level engineer design, full patent proudction on carbon fiber, ergonomic qualification match up C-arm using.
7. Optional installation for temperature control system.
Technical Data for 700G
| Bed Panel Size(full carbon fiber size) |
(2400*530)±10mm |
| Bed height from the ground(without pads) |
Minimum height: 700±20mm
Maxmium height: 1000±20mm |
| Lifting route(electric) |
300±20mm |
| Longitudinal route( electric) |
260±20mm |
| Head and foot tilt( electric) |
Head down tilt: 25°± 2°
Foot down tilt: 25°± 2° |
| Lateral tilt( electric) |
Left: 21°± 2°
Right: 21°± 2° |
| Back plate fold (manual) |
Upward: 65°± 2°
Downward: 20°± 2° |
| Leg plate fold (manual) |
Upward: 35°± 2°
Downward: 90°± 2° |
| Head Section fold (manual) |
Upward: 30°± 2°
Downward: 90°± 2° |
| Table panel X-ray absorption coefficient |
≤0.44mmAL |
| Power Supply |
220v 50Hz 300VA |
| Net weight/ capacity weight |
330KG/450KG |
| Bed lock |
Electric |
| Battery |
One week( 80-100 times) |
| CPR function |
One reset function |
Factory Workshop
Company Introduction
Grand Medical is a merged group.( the premier founder is YUDA medical group). It is established in 1992. The factory is located at Yanzhou economic development zone, Shandong Province, China. In 1992 year, YUDA medical group established, by producing hospital beds and medical carts.
We accumulated rich experience and technology. In 1998, we begin to produce OR equipment, like operating lamp, operating table and medical pendant. Since 2009, we constanly invested more than 30 million dollars on modern factory workshops to improve the production technology for hospital furniture, OR equipment, and ICU equipment, and R&D on medical imaging radiology, like digital X-ray imaging machine, monitor and ultrasound machine.Since 2015 year, we became largest medical manufacture group in North China, covers more than 480,000 square meters factory, with 38 workshops, and globally marketing system.
In the year 2020, Grand Medical Group, by inner prdoucts workflow growth, strategic merger and with the third factories participation, becone an extensive medical coverage manufacture enterprise. With more than 30years experience, we are equipped to serve every possible global heatlh programme and cater for every medical supply need that our customer may have.
FAQ
Q: Are you manufacturer ?
A: Yes,we have our own R&D team and sales team,We provide you one-stop service.
Q: Do you have CE,ISO13485?
A: Yes,our products are approved by CE,ISO13485, FDA, Russia CE.
Q: Is OEM &ODM available in your factory ?
A: Yes, you just offer us necessary documents and then we will produce the products as your requirements.
Q: What is your Payment term?
A: 1.L/C at sight;
2.T/T:30% deposit by T/T,70%balance by T/T before shipment
3.Trade term:EXW, FOB Shanghai or CIF&CFR
Q: What is your Packing details?
A: 1.Wooden case or carton package,standard export packages
2.All of the productions are inspected carfully by QC before delivery.
Q: What is your Delivery time?
A: Usually, we make merchandise inventory, if we have the products in stock,The delivery time is5-10 days after receiving the deposit;
If we don't have the products in stock, we will arrange the production right now, the delivery time will be 20-30days,It depends on the quantity of order
Q: What is your Min.order?
A: There's no minimum quantity
Audited Supplier 
){kind=link}
){kind=link}